Marvex – Ceramic & Porcelain Tile Adhesive – 20 kg

Marvex – Ceramic & Porcelain Tile Adhesive – 20 kg – Bag

Porcelain tile adhesive is a cementitious mortar adhesive supplied as a dry powder in pre-weighed bags, ready for use on site. It only requires the addition of clean water to produce an easily workable mortar.

Product Overview

• Excellent workability.
• Non-flammable.
• Shelf life of 12 months.
• Resistant to water and weather conditions.
• Suitable for dry and wet conditions.
• Suitable for horizontal and vertical surfaces.
• Suitable for interior and exterior applications.
• Controlled factory premixing ensures consistently high quality.
• Excellent adhesion to a wide variety of tiles available in the local market.

Manufacturer Overview

Mamco is a leading manufacturer of marble-chip adhesive, tile adhesive and grout, colored plaster, cementitious profiles, and external building insulation systems. The company also carries out building façade cladding works using marble chips, colored plaster, cementitious profiles, and external building insulation systems. It was among the first companies to implement building façade cladding projects in the Eastern Province, throughout the Kingdom of Saudi Arabia, and across the Gulf region.

Product Applications

• Specifically designed for porcelain and marble tiles.
• Suitable for tiling over cement boards and gypsum boards.
• Suitable for tiling on wall surfaces coated with Saveto products.
• Suitable for non-absorbent tiles, including large-format tiles.
• Suitable for tiling over smooth concrete surfaces, lightweight bricks, blocks, and gypsum boards.

Application Tips

• Use the mixed material within one hour.
• Gloves and protective eyewear are recommended during application.
• Store in a dry, shaded place below 35°C.
• Leave installed tiles undisturbed for at least 48 hours.
• Dampen all surfaces with clean water before application, except gypsum board. The surface should be damp without standing water.
• Clean tools and equipment with water immediately after use. Remove hardened material by mechanical means.

The surface must be sound, clean, and free from loose materials, oils, grease, dirt, curing compounds, and other contaminants.