Saveto Ceramic Tile Adhesive – 20 kg

Product Overview

• Slip-resistant and water-resistant.
• Suitable for dry and wet conditions.
• Controlled factory premixing ensures consistent product quality.
• Cementitious mortar adhesive composed of hydraulic binders, selected aggregates, and special additives.
• The unopened original Saveto bag has a shelf life of 12 months, provided it is stored off the ground in a dry, shaded place below 35°C.

Product Applications

• Suitable for ceramic tiles.
• Suitable for tiling over wall surfaces coated with Saveto products.
• Suitable for interior applications and horizontal and vertical surfaces.
• Suitable for tiling over smooth concrete surfaces, lightweight bricks, blocks, and gypsum boards.
• Saveto Ceramic Tile Adhesive is ideal for fixing ceramic tiles, terrazzo tiles, floor marble, and stone.

Application Tips

• Use the mixed adhesive within 2 hours.
• Remove hardened material by mechanical means.
• The substrate must be sound and clean.
• Clean tools and equipment with water immediately after use.
• Do not add water to the mixture once the adhesive has started to set.
• Leave installed tiles undisturbed for at least 48 hours.
• The adhesive mortar should not rise above half the thickness of the tile within the tile joints.
• Allow the mixed material to stand for 10 minutes, then briefly remix without adding additional water.
• For mixing, use a low-speed electric drill fitted with a suitable paddle until a uniform, lump-free consistency is achieved.
• Dampen all surfaces with clean water before application, except gypsum boards. The surface should be damp without standing water.